~ Jailbreak PS3 ~

| PS3, Uncategorized | No Comments

必要東西

  1. PS3 firmware 必須為原廠3.55或以下 
  2. 3000機不可
  3. 3.55 OFW(原廠 firmware)
  4. 3.5.5 CFW kmeaw 
  5. QA Flag
  6. Rogero 4.30 v2.05
  7. multiman

最安全既做法係restore 3.55 OFW->3.55CFW->Rogero 4.30 v2.05

如果你之前用過trueblue 的話都係restore 去OFW好一點。

RESTORE時唔想嚇自己的話,就去restore mode , 記得玲D碟出尼

將3.55 OFW 的PS3UPDAT.PUP 抄去USB的

/PS3/UPDATE

之後入restore mode

進入restore 方法:

  1. Turn off your Playstation 3.
  2. Hold the Power button down. The system will turn on and turn off once again.
  3. Once the system has been shutdown, Re-press and hold you finger until you hear 2 consecutive beeps.
  4. When you hear the 2 beeps take finger off power button. You will be promted to plug in your controller via usb and then press the PS button. The Recovery Menu will pop up. 

完成後reboot , 做多次係3.55CFW

成功JAILBREAK 後會係game section 出現

  • /app_home/PS3_GAME
  • Install Package Files

install-kmeaw

之後將QA Flag.pkg 抄到USB 及安裝 QA Flag 聽到滴滴滴三聲之後ps3自動退出到XMB界面【如果没到滴滴滴的音說明 Toggle QA 没正確開啟,如果之前安装并運行成功過QA Flag】

去到XMB介面的settings>network settings
同時按下L1+L2+L3(冬菇制)+R1+R2+十字制的下制
便會在settings>network settings下出現edy viewer,debug settings 及 install package files
進入debug setting 將system update debug 改為on

1zf5x6u

確定debug mode 開左後可以unzip Rogero 4.30 v2.05

將"Rogero_CEX4.30_V2.05" 改成 "PS3UPDAT.PUP" 及抄到USB到

/PS3/UPDATE

之後再去restore mode 刷成Rogero_CEX4.30_V2.05

reboot 後抄multiman的pkg去USB到, 返去PS3的game> install package files install multiman

用FTP抄game 去HDD0 的game 內就完成

トラックバック

このブログ記事に対するトラックバックURL:

コメント & トラックバック

No comments yet.

Comment feed

コメントする

Smiley face

March 2024
S M T W T F S
 12
3456789
10111213141516
17181920212223
24252627282930
31